There is a little bit of routine maintenance that comes along with this type of driveway. You’ll want to go through the process of sealcoating your driveway in order to protect it and keep it looking nice. Here are a few things you should know about sealcoating and some things you should watch out for.
There are a few different times of the year that you should think about sealcoating your driveway. You don’t want to do it during the winter for obvious reasons. It’s far too cold and wet for that to happen.
The summer is a great time of year for you to sealcoat your asphalt driveway. The heat from the sun will help it cure properly. You can also do this process in the spring and fall if the weather is still cooperating for you.
It takes a sealcoating 24–48 hours to cure, during which time all traffic, both foot, and vehicle, should be kept from contacting the surface. You’ll want to plan for this process.
Make sure your vehicles are out of the garage. Otherwise, you’ll be trapped inside there for a couple of days.
Make sure there will be something at the end of the driveway that keeps trucks and other vehicles from driving onto your driveway.
Make sure you keep neighborhood kids from walking across it as well. You can go back on once the product is dry to traffic.
Clean Your Driveway Ahead of Time
Approximately 24 hours before you will be sealcoating your driveway, you’ll want to make sure the area is completely clean. If you have a power washer, this is the perfect tool to use for the job. Ideally, you want to blow away any random rocks, dirt or debris that is in the driveway. This will result in a much smoother final surface.
Repair the Cracks
There’s not really much of a point to sealcoating your driveway if it has unfixed cracks in it. You’ll want to make sure that you fix the cracks beforehand.
To fill in cracks, there are a couple of different tools you can use. For smaller cracks that are less than ½ inch wide, there are bottles of crack filler that you can use. Make sure that when filling in cracks that you don’t overfill them so that they don’t become visible underneath the sealcoat.
Before applying the sealcoat, make sure to wait at least 4–8 hours in order to allow the crack filler to dry. For bigger cracks, use a driveway patch. If this is the case, don’t apply the sealcoat until at least 4–6 weeks after putting on the patch.
other valuable tips:
You can complete this process on your own, using supplies that you get from the hardware store. You also have the option of selecting a local professional to do the job for you. Just be sure that you have any cracks or settling addressed before the sealcoating process. There is special filler that can be applied a day or two before sealcoating. This helps protect your driveway and keep it looking smooth.
Find Driveway/Walkway Services Driveways Walkways Steps Concrete top-rated, pre-screened local contractors FREE: download contractor selection enter zip code – powered by HomeAdvisor ™
Image credit: Pixabay
end of post … please share it!
Exterior Decor & Chimney
Roofing & Siding